Iceland tries out a new way for Geothermal Power.

From 2016... From article, (In the world of clean energy plants, geothermal is not as well known or as widely used as solar or wind. Geothermal heat pumps use hot rocks deep in the ground as a heat source to generate electricity. But if you could build a heat pump that taps liquid hot rocks, or magma, then you might really be in business. In 2009, the Iceland Deep Drilling Project (IDDP) accidentally drilled into a magma reservoir about 2 kilometers (1.25 miles) below the surface when it was planning to construct a conventional geothermal well. As an experiment, the IDDP poured water down the magma well to see how much energy it could generate, and they ended up creating the most powerful geothermal well ever drilled, generating some 30 megawatts of power. Now the project is hoping to do the same thing, except intentionally and on a larger scale. The drilling of a hole that will be 5 kilometers (3 miles) deep in southwestern Iceland began in August at a geothermal facility dubbed Thor. The IDDP intends to tap a landward extension of the Mid-Atlantic Ridge, where two of Earth's tectonic plates meet, and create the hottest hole ever drilled. In this subterranean zone, magma that is released from volcanic activity heats seawater up to temperatures between 400 and 1000 degrees Celcius (750 to 1800 degrees Farenheit). The intense pressures at that depth—about 200 times atmospheric pressures—force the superheated water to form "supercritical steam," which is neither liquid nor gas and holds more energy than both. If the IDDP can tap a reservoir of supercritical steam, a geothermal plant could be constructed with a power capacity of 50 MW, which is 10 times more than the 5 MW a conventional geothermal plant puts out.) Iceland Is Drilling a 3-Mile Hole to Tap Magma Power